Automatic Interfold Multifold Paper Towel Log Saw Cutting Machine
Description:
This ACE-FLS Automatic Interfold Multifold Paper Towel Log Saw Cutting Machine is for cutting facial tissue paper and interfold hand paper towels
and also coreless toilet rolls. It can accommodate big ranges of
cutting sizes. The height of log can be 140mm 150mm etc. It adopts
3 servo motors to control the cutting length and infeed to ensure
the cutting accuracy.
Technical parameters:
Adopt 2 servo motors to control the timing belts before the
circular blade cutting and after the circular blade cutting .(But
other companies’ machines use only one servo motor or NO servo
motor, controlled by only inverter, which cannot guarantee accurate
cutting.)
Circular blade outer diameter: 610mm
Blade grinding/sharpening system: Automatically and pneumatically
grinding/sharpening, grinding/sharpening time and interval
parameters can be set in the touch screen. For example, you can set
it to sharpen for 1 seconds every 30 minutes or every 50 cuts.
Cutting system: 360° rotating cutting. (Not like other companies
machines, the cutting system is only up-and-down cutting.)
Trim removal system: Automatically blew away by air. Trimmed size:
20-65mm.
Control system:
PLC programmed control,
Inverter for variable frequency speed control,
Touch screen for operation
Servo driving: adopt 2 servo motors to control the timing belts
before the circular blade cutting and after the circular blade
cutting .(But other companies’ machines use only one servo motor or
NO servo motor, controlled by only inverter, which cannot guarantee
accurate cutting.)
Air compressor: 4-8kg/cm2pa, supplied by customer.
Installed Power: 3phase 208v 60hz. total about 6.4kw
Servo system power: about 2 kw
Rotate motor power: about 2.2kw
Blade motor power: about 2.2kw
Machine weight: about 2T.
Machine dimension: about 5x1.9x1.95m LxWxH. Floor plan refer to
below.
Brands for parts used for the machine.
Motor: Siemens (Germany)
JSCC motors for infeed conveyor. (Germany)
PLC: Siemens (Germany)
Touch screen: Siemens (Germany)
Inverter: DELTA (Taiwan)
Relays: Weidmuller (Germany)
Sensors: Omron (Japan) or other international brands.
Technical parameters
| Main structure: | Single lane cutting |
| Applicable material | Facial tissue and hand towel |
| Designed speed: | 150 cut/min |
| Working speed: | 80-140 cut/min when cutting length 100mm, about 140 cut/min; when cutting length 230mm, about 120 cut/min. |
| Infeed channel: | With one piece infeed conveyor 3meters |
| Cutting delivery system | Independent servo control and driving. |
| Cutting sizes ranges: | L 60-300mm adjustable W 60-110mm H 25-120mm |
| Cutting tolerance length: | ±1mm |
| Cutting tolerance vertical: | ±1.5mm |
Brands of components used on this tissue cutting machine.
PLC Siemens
Inverter Siemens
Touch screen Siemens
Servo motor DELTA
Servo drive DELTA
Bearing SKF
Electrical parts Schneider
Steel #45
Finished paper towel and facial tissue logs cut by Automatic Interfold Tissue Paper Log Saw Cutting Machine Siemens
Servo Drive:
